Alpha M

MAISONWOLFE Alpha M Awnings are stylish, robust and energy efficient.

Designed in Australia, the Alpha Awning Series is a modern awning system suited to all exterior areas.

Alpha M is the next evolution in external awnings

Alpha M is the next evolution in awnings, developed for diverse weather conditions and adapted locally for Australia’s harsh climate. Australia’s first and only magnetic retention system, delivering 200kg^ of pull force keeping fabric taut and neat inside channels.

Advanced Technology

Pairs of Neodymium Magnets, in both the side channel and the screen guide, provide powerful pull force on either side keeping fabrics taut within the channel.

Fabric snaps into position as the awning is lowered, raised or moved with push force keeping the awning looking beautifully smooth, flat and taut.

The free floating side channels gives the fabric the ability to breathe in and relax out during windy weather and still return to full tension.

Neodymium Magnets within the side channels provides a powerful pull force.

^Per average awning drop of 2.4m. Before relying on the representations made relating to the Alpha M Awning, please read our disclaimer at www.turnils.com.au/AlphaM. Despite the Alpha M MagnaTrack Awning’s performance in high wind loads, it’s recommended that all awnings be retracted during wet or high wind conditions.

Inner Strength

Featuring a tube-in-tube design for unrivalled strength and minimal deflection via a 60mm octagonal tube nested within a uniquely shaped 102mm rounded tube. The specially engineered design enables the awning to hang straight at ultrawide sizes extending up to 6.5 metres wide.

Tube-in-tube design for unrivalled strength and minimal deflection.

Clever Self Correction

Alpha M has the smarts to self-correct fabric blow-outs back into position without a service call. Simply raise the awning above where the skin has come out and lower the awning completely. The powerful magnets effortlessly return the Stance Fibreglass Sunscreen fabric into the channel and pulls it tight eliminating the appearance of creases or folds.

Measuring & Limitations

To ensure a perfect fit, Alpha M requires measurements for top and bottom widths as well as the drop. Awnings can be installed on face or reveal with a removable snap-over cover for side channels concealing all fasteners.

Minimum Width: 1000mm – Minimum Drop: 1000mm
Maximum Width: 6500mm – Maximum Drop: 4000mm

Note:

  • A U-Channel is supplied for all awnings with a difference between the top and bottom width measurements greater than 20mm.
  • Alpha M is not compatible for spaces with a width variation of more than 70mm between top and bottom width measurements.
  • Awnings less than or equal to 1500mm wide with drops of 2750mm or greater will be supplied with a double bottom bar as standard.

CONTACT US

NAME*
Name is required
EMAIL*
Value is required
PHONE NUMBER
phone number is required
WHAT CAN WE HELP YOU WITH?
This field is required
MESSAGE
Thank you!